Wall-Mount power Supply SMWM-Series
The power supply is built into a powder coated metal enclosure designed for wall mounting and designed for continuous operation rated power. The connections for the AC input power, DC output copper bus bars, and controls terminals are located at the bottom of the wall mount enclosure. In addition to thorough attention to design and construction quality, the cooling system enables the power supply to work reliably with a long lifespan. The cooling air enters through air openings located on the wall-mount and a special designed Air Guiding System keeps the electronics isolated from the air flow. An Automatic Fan Speed Control adjusts the air flow to the required cooling, which reduces the wear of the cooling fans and reduced ambient noise.
Standard Features
Main Components:
- Independent voltage and current limit controls
- EMC filter
- Power semiconductors for pulse amplitude modulation
- Electronics for constant current and voltage control
- Shunt
Protection Devices:
- Over current protection
- Short-circuit protection
- Over temperature supervision
System Interface:
- Analog DC volt meter, Option: Digital meter
- Analog DC amp meter, Option: Digital meter
- Potentiometer to set nominal DC voltage, 0 – 100 %
- Potentiometer to set nominal DC current, 0 – 100 %
- Selector Switch Rectifier “On/Off”
Technical Data:
Input voltage: See Model*, 3Ph, 50-60Hz + GND
Power factor: > 0.94
CE Mark: Compliance for Europe
Duty factor: 100 %
Ripple voltage: < 3 % across full output range
Setting: 0 - 100 % current and voltage
Control: Constant current and voltage control
Control accuracy: < 1%
Cooling: Variable speed - Forced air cooled
Ambient temperature: Up to 95 °F
Site altitude: Up to 3280 ft. above sea-level
Dimensions: 19.3/ 11.8/ 35.9 (W/ D/ H) inches
Weight: 110 lbs. Approximately
Applications
Applications:
- Aircraft starting and servicing
- Air conditioning and Electric Heat
- Battery charging
- Avionics
- FBO, MRO Aircraft Servicing
- Any application where good clean DC power is required
Download Complete Specifications> Wall-Mount SMWM-Series.pdf
Complete Specifications
Download Complete Specifications> Wall-Mount SMWM-Series.pdf
MODELS AVAILABLE:
| Output Current | Output Voltage | Input Voltage |
|---|---|---|
| SMWM-200-45 –3P-4: 0 to 200 Amps |
0 to 45 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-400-45 –3P-4: 0 to 400 Amps |
0 to 45 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-550-45 –3P-4 0 to 550 Amps |
0 to 45 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-200-30 –3P-4 0 to 200 Amps |
0 to 30 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-650-30–3P-4 0 to 650 Amps |
0 to 30 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-700-30–3P-4 0 to 700 Amps |
0 to 30 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-800-30 –3P-4 0 to 800 Amps |
0 to 30 VDC | 480V,3 phase, 50 / 60 Hz |
| SMWM-100-45–1P-2 0 to 100 Amps |
0 to 45 VDC | 208–230V, 1 phase, 50 / 60 Hz |
| SMWM-270-45–1P-2 0 to 270 Amps |
0 to 45 VDC | 208–230V, 1 phase, 50 / 60 Hz |
| SMWM-100-30 –1P-2 0 to 100 Amps |
0 to 30 VDC | 208– 230V, 1 phase, 50 / 60 Hz |
| SMWM-270-30–1P-2 0 to 270 Amps |
0 to 30 VDC | 208–230V, 1 phase, 50 / 60 Hz |
